Abstract:Aiming at the characteristics of shale gas plugging in Sichuan-Chongqing block, easy to blow back and high requirements for pressure, this paper developed a kind of ARP anti-return leakage plugging agent based on high softening point resin. It has the ability of deformation, cementation and curing. It can be used in combination with bridge plugging particles to cement and solidify with plugging agent particles in formation cracks to improve pressure bearing capacity and anti-return ability. The laboratory evaluated the dispersibility of the ARP plugging agent in the field oil-based drilling fluid and the bonding strength with the field leakage plugging agent, and tested the pressure bearing capacity and anti-return ability after the cementation was cured. According to the needs of field application, the density of ARP anti-return leakage plugging agent is determined to be 1.8g/cm3, the particle size is 0.5-2mm, and the optimal ratio is formed with the field plugging agent. That is, ARP anti-return leakage plugging agent accounts for 25 parts, and on-site leakage plugging agent accounts for 75 parts, and its bonding strength can reach 7.8MPa. When plugging 2-3mm natural cracks, the positive pressure can reach 8MPa, and the anti-reflection ability can reach 3.3MPa. At the same time, the on-site construction process is designed according to the material characteristics, and a good on-site application effect is achieved.