Abstract:Polymer flooding widely used in oilfields for a long time corresponds to serious plugging of oil wells and decreased liquid volume, which seriously affects the further development of reservoirs after polymer flooding. Using XRD, SEM and other technical means to analyze the composition and composition of oil well plugging products; through different plugging fluid simulation and near-well reservoir condition simulation, the plugging degree and main controlling factors of oil well plugging are studied. The results show that the plugs in the oil wells of polymer flooding reservoirs are mainly polymer aggregates that are cross-linked and embedded to adsorb formation mineral salts and clays, accounting for 65.6%; followed by formation sand particles and cements, and crude oil, respectively, 17.8 %, 16.6%. The plugging of porous media caused by the formation of sand particles is the main controlling factor of plugging near the oil well. The polymer agglomerates formed by polymer derivative cross-linking and adsorption agglomeration aggravate the degree of blockage of the oil well. Based on the guidance of the research on the plugging mechanism of polymer flooding reservoirs, the near-well crude oil cleaning of plugged oil wells + the oxidative degradation of polymer micelles, the integrated prevention and control program of oil well plugging and sand control for the effective sand consolidation control of far wells has good application effects, and the average single well extraction 86.8%.