Aiming at the problems of sand production in shallow low-temperature formation and high water cut in oil wells， laboratory research on low-temperature solidified water blocking and oil permeability sand control materials was carried out. A sand control material was prepared by blending quartz sand，epoxy resin，relative permeability regulator and dispersant. The curing mechanism，thermal stability and micro morphology of coated sand and artificial core were analyzed by FT-IR，thermogravimetry and scanning electron microscope，and the compressive strength and water/oil permeability of artificial core were investigated. The experimental results showed that under the condition of low temperature of 30—70 ℃，the artificial core obtained by solidifying the sand control material with 30% relative permeability regulator had excellent compressive strength，more than 4.22 MPa. Moreover，the cores had certain oil-water selectivity，the water phase permeability and oil phase permeability being of 963×10^-3 and 5513×10^-3 μm²，respectively. The obtained sand control materials met the requirements of sand control and water resistance of low temperature shallow wells under low temperature of 30—70 C.